Mercedes immobiliser emulator
Project of Immo Emulator for Mercedes Benz vehicles with CAN WFS (Immo Boxes). Emulator support Mercedes Sprinter, A-Class, ML, Vito and other MB cars with CR1 and CR2 Engine Control Units. Can be useful in case of damaged immobiliser, the car key etc.
Schematic diagram is identical for CR1 and CR2 ECU's. The differences are only in frequency of crystal oscillator and content of Attiny. Frequency of crystal oscillator for MB Immo Emulator CR1 is 8MHz, for CR2 is 16MHz. Schematic circuit diagram is simple and does not need any guide. All electronics components are standard and available.
Mercedes immo emulator cr1, cr2 schematic diagram
Here you can download a binary files for programming Attiny for this project.
CR2 ECU with 95P08 / 5P08C3 / 35P08 eeprom
In addresses from 0x1D0 to 0x2D0 in place of original values write the following data (see image below) or simple copy / paste values from 0x1D0 to 0x2D0 from EEPROM file 95P08 available for download.
CR1 ECU with 24C04 eeprom
In addresses from 0x1D0 to 0x2D0 in place of original values write the following data (see image below) or simple copy / paste values from 0x1D0 to 0x2D0 from EEPROM file 95P08 available for download.
CR1 ECU with 24C04 eeprom
In addresses from 0x1E0 to 0x1FF in place of original values write the following data or simple copy / paste values from 0x1E0 to 0x1FF from EEPROM file 24C04 available for download.
CR1 ECU with 24C02 / B58 eeprom
In addresses from 0x38-0x47 in place of original values write the following data or simple copy / paste values from 0x38 to 0x47 from 24C02
Emulator connects to ECU with 4 wire: Power Supply (12V), GND, CAN-H and CAN-L. Connection is simple. Instructions with pictures about connections of MB Immo Emulator to ECU's with can find on a lot of emulators sellers websites. Some connection can find on this website in pinouts section.
The small size of MB immobiliser Emulator allows installation it directly inside the ECU.
NOTE
When editing eeprom, only selected addresses should be modified. All other data must remain original.
In order to properly function recommended is cut-off CAN-L and CAN-H at WFS (immo box).
Note that dump for Attiny and frequency of crystal oscillator for CR1 ECUs are different that CR2 ECUs. These are two separate projects with the same schematic.
Presented project of MB Immo Emulator is tested and working. It has beed used successfully for many years with Mercedes Sprinter, Vito, ML, A-Class with many CR1 and CR2 ECU’s.
Number of files: 3,106,364 million - Last updated: Sep 07, 2024
File Name ↓ | File Size ↓ | Date ↓ |
---|---|---|
Parent directory/ | - | - |
mercedes_immo_emulator_schematic_circuit_diagram.png | 78.3 KiB | 2021 |
xmb_immo_emulator_cr2_data.png | 15.7 KiB | 2021 |
mercedes_immo_emulator_assembled.jpg | 7.4 KiB | 2021 |
mb_immo_emulator_24c02_data_cr1_.png | 5.0 KiB | 2021 |
eeprom_data_24c04_mb_immobiliser_emulator.png | 2.7 KiB | 2021 |
xeeprom_data_24c04_mb_immobiliser_emulator.png | 2.7 KiB | 2021 |
mb_immo_emulator_binary_files.rar | 1.5 KiB | 2021 |
eeprom_95p08.rar | 447 B | 2021 |
24c02_eeprom_mb.rar | 251 B | 2021 |
eeprom_24c04_mb.rar | 226 B | 2021 |