xDecoder 10.4 license full activated

xDecoder 10.4 is new program allow you to remove error codes (DTC) from supported ECU files. Checksum is not calculated, for our luck most of the flashers do it on the fly, when the file is write in ECU. The program allows you to find, in just a couple of clicks in the firmware file, the error you need and disable it with the DTC off error mask.

License full activated - Work 100%

Download link below 👇

	Alfa Romeo, Fiat, Lancia
	BOSCH EDC15
	BOSCH EDC16
	BOSCH EDC17
	BOSCH MED17
	DELPHI DCM3.4
	DELPHI DCM3.5
	MARELLI MJD6
	MARELLI MJD8
	MARELLI MJD9
	MARELLI IAW7

	BMW
	BOSCH EDC15
	BOSCH EDC16
	BOSCH EDC17
	BOSCH ME9
	BOSCH MEVD17 - boot read
	SIEMENS MS43 - boot read
	SIEMENS MSS65

	Chery
	BOSCH ME7

	Chevrolet
	DELCO E78
	DELCO E83
	DELCO E84
	DELCO E87
	DELCO E98
	SIEMENS SIRIUS D42

	Citroen, Peugeot
	BOSCH EDC15
	BOSCH EDC16
	BOSCH EDC17C10
	BOSCH EDC17C60
	BOSCH MD1
	BOSCH ME7
	BOSCH MED17
	BOSCH MEV17
	CONTINENTAL SID208
	CONTINENTAL SID807
	DELPHI DCM3.4
	DELPHI DCM3.5
	DELPHI DCM6.2

	Dodge
	BOSCH EDC17

	Ford, Mazda
	BOSCH EDC16
	BOSCH EDC17CP05
	BOSCH MED17.2.2
	BOSCH MEDG17.0
	CONTINENTAL SID208
	CONTINENTAL SID807
	DELPHI DCM3.5
	DENSO RFx

	HINO
	EDC17C01

	Honda
	BOSCH EDC17

	Hyundai, Kia
	BOSCH M7
	BOSCH ME17
	BOSCH EDC16
	BOSCH EDC17
	DELPHI DCM3.7

	Isuzu
	BOSCH EDC17CV41

	Iveco
	BOSCH EDC16
	BOSCH EDC17

	Jeep
	BOSCH EDC16CP31

	Land Rover
	BOSCH EDC17
	DENSO

	Man
	BOSCH EDC7C32

	Maserati
	ME7.3.2

	Mercedes
	BOSCH EDC15C6
	BOSCH EDC16
	BOSCH EDC17
	BOSCH ME9
	BOSCH MED17
	BOSCH MD1CP001
	CONTINENTAL SIM266
	DELPHI CRD2
	DELPHI CRD3

	Mini
	MEV(D)17.2.2

	Opel, Vauxhall
	BOSCH EDC16
	BOSCH EDC17
	BOSCH ME1.5.5
	BOSCH ME7.6.x
	BOSCH PSG16
	DELCO E78
	DELCO E83
	DELCO E84
	DELCO E87
	DELCO E98
	DELPHI MT35E
	DENSO DIESEL
	MARELLI MJD6Ox

	Porsche
	BOSCH ME7
	CONTINENTAL SDI3 - SDI9

	Renault, Nissan
	BOSCH EDC16
	BOSCH EDC17
	HITACHI GASOLINE
	SIEMENS SID301
	SIEMENS SID305
	SIEMENS SID307
	VALEO V42

	Smart
	BOSCH BMS N82
	BOSCH ME7.7.0

	Subaru
	DENSO DIESEL 2.0

	Suzuki
	BOSCH EDC16C3 - as Renault
	DENSO GASOLINE 32bit

	VAG
	BOSCH EDC15
	BOSCH EDC16
	BOSCH EDC17
	BOSCH ME7
	BOSCH MED17
	BOSCH MED9
	CONTINENTAL PCR2.1
	DELPHI DCM3.7
	DELPHI DCM6.2
	SIEMENS SIMOS3
	SIEMENS SIMOS7
	SIEMENS PPD - bdm read

	Volvo
	BOSCH EDC16
	BOSCH EDC17

Release history:

	10.4.0 (23.06.2022)
	- Support for BMW EDC15C4

	10.3.0 (20.06.2022)
	- Support for MB BOSCH MD1CP001

	10.2.0 (13.06.2022)
	- Custom function fast buttons added
	- Fixed minor bugs caused by optimization

	10.1.0 (16.05.2022)
	- Code and resources optimisation

	10.0.0 (30.04.2022)
	- Changed activation system and visual arrangement

	9.9.0 (27.12.2021)
	- Support for VAG Magneti Marelli IAW9GV

	9.8.0 (11.11.2021)
	- Support for VAG BOSCH MD1CP004

	9.7.0 (29.10.2021)
	- Support for BMW BOSCH MD1CS001

	9.6.0 (26.10.2021)
	- Support for BMW BOSCH MD1CP002

	9.5.0 (18.10.2021)
	- Support for VAG CONTINENTAL SIMOS18

	9.4.1 (01.09.2021)
	- Support for FCA BOSCH ME7.9.10

	9.4.0 (31.08.2021)
	- Support for FCA BOSCH ME7.3.x

	9.3.0 (14.06.2021)
	- Support for Mercedes DELPHI CRD3

	9.2.0 (12.06.2021)
	- Support for Iveco BOSCH EDC16C39

	9.1.0 (09.06.2021)
	- Support for MAN BOSCH EDC7C32

	9.0.0 (04.06.2021)
	- Support for some of GM ACDelco E84

	8.9.0 (31.05.2021)
	- Support for some of GM ACDelco E98

	8.8.0 (09.05.2021)
	- Support for Hyundai Kia BOSCH EDC16

	8.7.0 (02.05.2021)
	- Support for Chery BOSCH ME7

	8.6.0 (14.04.2021)
	- Support for Hyundai Kia BOSCH EDC17

	8.5.0 (21.03.2021)
	- Support for most of GM ACDelco E78

	8.4.0 (09.03.2021)
	- Support for VAG SIEMENS SIMOS3
	  I recommend read/write ecu in boot mode
	  to make sure, that all changes will be applied.

	8.3.0 (04.03.2021)
	- Support for most of GM ACDelco E83

	8.2.0 (01.03.2021)
	- Support for some of GM ACDelco E87

	8.1.0 (21.02.2021)
	- Support for FCA Magneti Marelli IAW7GF

	8.0.0 (03.02.2021)
	- Support for PSA SIEMENS SID208

	7.9.0 (24.01.2021)
	- Support for Jeep BOSCH EDC16CP31

	7.8.0 (04.01.2021)
	- Support for Mercedes BOSCH EDC16

	7.7.0 (22.12.2020)
	- Support for Fiat Magneti Marelli MJD9DF

	7.6.0 (20.12.2020)
	- Added support for Fiat Magneti Marelli MJD8Fx

	7.5.0 (15.12.2020)
	- Support for Maserati BOSCH ME7.3.2

	7.4.0 (29.11.2020)
	- Support for PSA BOSCH ME7.4.x

	7.3.1 (20.11.2020)
	- Support for all reported VAG BOSCH ME7

	7.3.0 (08.11.2020)
	- Support for PSA BOSCH EDC17C10
	- Support for some of Smart BOSCH BMS modules

	7.2.0 (02.11.2020)
	- Support for PSA BOSCH EDC17C60
	- Rebuilded ECU type auto detection for EDC17

	7.1.0 (31.10.2020)
	- Support for Hino BOSCH EDC17C01
	- Update Isuzu to work with some EDC17C09

	7.0.0 (29.10.2020)
	- Support for Isuzu BOSCH EDC17CV41

	6.9.0 (18.10.2020)
	- Support for PSA BOSCH EDC16CP39

	6.8.1 (14.10.2020)
	- Support for Opel Magneti Marelli MJD6Ox
	- Fixed Mercedes MED17 to support other file sizes

	6.7.0 (11.10.2020)
	- Support for Ford BOSCH EDC17CP05

	6.6.0 (02.10.2020)
	- Support for Fiat Magneti Marelli MJD6F3

	6.5.0 (28.09.2020)
	- Support for BMW SIEMENS MSS65

	6.4.0 (27.09.2020)
	- Support for Renault Valeo V42

	6.3.0 (18.09.2020)
	- Support for Mercedes BOSCH EDC15C6

	6.2.0 (06.09.2020)
	- Warning, that update is needed
	- Folders in exported a2l file
	- New layout

	6.1.0 (04.09.2020)
	- Added export to a2l file
	  for test only, work with most MEDC17

	6.0.0 (23.08.2020)
	- Support for PSA BOSCH MD1CS003

	5.9.0 (19.08.2020)
	- Support for BMW SIEMENS MS43

	5.8.0 (31.07.2020)
	- Support for FCA BOSCH ME(D)17

	5.7.1 (27.07.2020)
	- Added sorting of error codes list with F11

	5.7.0 (26.07.2020)
	- Support for Land Rover BOSCH EDC17

	5.6.0 (21.07.2020)
	- Support for Suzuki Denso 32bit gasoline ECU

	5.5.0 (19.07.2020)
	- Support for Dodge BOSCH EDC17C79

	5.4.0 (05.07.2020)
	- Support for VAG BOSCH EDC15P and some EDC15V

	5.3.0 (28.06.2020)
	- Support for Honda BOSCH EDC17

	5.2.0 (23.06.2020)
	- Support for Hyundai Kia BOSCH M7.9.8

	5.1.0 (22.06.2020)
	- Support for VAG SIEMENS PPD
	  work only with BDM (full) files

	5.0.0 (20.06.2020)
	- Program build from scrach on new programming platform.
	- Is stable, "fast" and support long filenames.
	- All ECU types have active error list window.
	- You can copy error list to the clipboard by taping F12.
	- You can select and delete error from the list directly.
	- You can load error list txt file and delete many errors
	  with one click, just create txt file with codes, that
	  you want remove, separated with dot, coma or space,
	  load txt file to the program, after that load ECU file
	  and all listed errors codes will be disabled.
	- Update to support files reported as not working.
	  (some MB MED17, Mini MED17, Opel MT35, PSA SID807)

	4.3.0 (23.04.2020)
	- Support for Mercedes DELPHI CRD2
	- Decoding Bxxxx codes stored in some files.

	4.2.0 (21.04.2020)
	- Support for VAG SIEMENS SIMOS7

	4.1.0 (16.04.2020)
	- Support for Opel Vauxhall BOSCH ME7.6.x
	- Added error code confirmation with enter key
	- Added drag n drop

	4.0.0 (14.04.2020)
	- Support for Renault Nissan SIEMENS SID307

	3.9.0 (13.04.2020)
	- Support for Renault Nissan SIEMENS SID305

	3.8.0 (11.04.2020)
	- Support for Renault Nissan SIEMENS SID301

	3.7.0 (10.04.2020)
	- Support for Subaru DENSO 2.0 DIESEL

	3.6.0 (08.04.2020)
	- Support for Porsche CONTINENTAL SDI3 - SDI9

	3.5.0 (07.04.2020)
	- Support for Volvo BOSCH EDC17

	3.4.0 (06.04.2020)
	- Support for Ford BOSCH MED17.2.2 (MEDG17.0)

	3.3.0 (03.04.2020)
	- Support for Nissan HITACHI with SH705x

	3.2.0 (02.04.2020)
	- Improved VAG EDC17 - now should work will all

	3.1.0 (25.03.2020)
	- Support for Porsche BOSCH ME7

	3.0.0 (24.03.2020)
	- Support for VAG DELPHI DCM6.2
	- Revised VAG DELPHI DCM3.7

	2.9.0 (23.03.2020)
	- Support for PSA DELPHI DCM6.2

	2.8.0 (22.03.2020)
	- Support for part of VAG EDC17
	- should work with CP04 CP14 CP20 CP44 U01 and U05

	2.7.0 (21.03.2020)
	- Support for Mini MEV17.2.2

	2.6.1 (10.03.2020)
	- Fixed bug in Hyundai DCM3.7 - work with more variants

	2.6.0 (03.03.2020)
	- Support for Hyundai Kia DELPHI DCM3.7

	2.5.0 (02.03.2020)
	- Support for PSA Fiat BOSCH EDC15

	2.4.0 (29.02.2020)
	- Support for Chevrolet SIEMENS SIRIUS D42

	2.3.0 (21.02.2020)
	- Support for Mercedes CONTINENTAL SIM266

	2.2.0 (04.02.2020)
	- Error codes list added to selected ecu types

	2.1.0 (02.02.2020)
	- Support for Opel BOSCH ME1.5.5
	- First implementation of error codes list

	2.0.0 (27.01.2020)
	- Support for Smart BOSCH ME7.7.0

	1.9.0 (26.01.2020)
	- Support for PSA CONTINENTAL SID807

	1.8.0 (24.01.2020)
	- Support for Ford CONTINENTAL SID807

	1.7.0 (24.01.2020)
	- Support for Ford CONTINENTAL SID208

	1.6.0 (24.01.2020)
	- Support for Ford DELPHI DCM3.5

	1.5.0 (19.01.2020)
	- Support for Volvo BOSCH EDC16c31

	1.4.0 (12.01.2020)
	- Support for Volvo BOSCH EDC16c34

	1.3.0 (10.01.2020)
	- Fixed bug in PSA DCM3.5 - work with more variants

	1.2.0 (04.01.2020)
	- Improved Mercedes MED17 - work with obd readouts

	1.1.0 (03.01.2020)
	- Improved Mercedes EDC17 - work with obd readouts

	1.0.0 (02.01.2020)
	- New name and look with more space and functions
	- New id algo with support of NVMe hard drives
	

Additional information

• Date: 07/31/2022
• Version: 10.4
• Size: 52.1 MB
• Available in: English
• Requires: Windows
• License: Full license activated - Work 100%
• Downloads: 56321 times
• Rating: 4.8/5 (49439 ratings)